Replica-Watches will teach you how to choose a fine imitation watch suitable for your size.

I think everyone has encountered this situation: I saw a fine imitation watch, I like it very much, and I tried to buy it. I found that the effect is not good. In fact, a large part of the reason is a matching value between the dial and the wrist.

Step 1: Measuring the wrist size

The wrist should be measured with a soft ruler (not too tight to avoid deformation of the ruler) next to the position behind the wrist.

If you don’t have a tape measure, you can use a soft rope or a piece of soft paper to wrap around the wrist. Remember, you must wear the wrist of the watch. Each person’s left and right wrists are generally different in thickness (reason… it’s hard to say)

Step 2: Formula conversion to determine the size of the wrist suitable for the wrist

– Convert the unit of measure measured in step 1 to millimeters. For example 16 cm to 160 mm.

– Remove this number with the watch diameter number you want to buy. For example, if you want to buy a 38mm diameter dress watch with a wrist circumference of 160mm, the result will be 160:38 = 4.2. This number is called the case index.

– Based on this result, it can be judged whether the size of the watch is suitable for the wrist. The most suitable case index range is from 4 to 5; if it is less than 4, the watch is too big. If it is greater than 5, the watch is too small. For example, the wrist size is 160mm. Then a watch with a size of 32 mm to 40 mm is suitable for wearing.


– If it’s a slender but wide wrist. The case index should be chosen to be slightly less than 4.

– Sport watches and dive watches can choose a case index of less than 4 without any problems.

– If it is a small wrist, you should not choose a watch that is too thick.

– If the lugs are too long, you should not choose a watch that is too large.

– The square case always looks bigger than the round case, so the case index of the square table should be slightly larger.

– An oval and rectangular watch that measures the wrist horizontally.


What is the difference between imitation and real?

Now the simulation of high imitation watches is getting higher and higher, so many friends who are unfamiliar with watches are difficult to distinguish between true and false, and even do not know the difference between imitation and really watches? In order to let everyone have a deeper understanding of imitation, Today, I will explain the difference between imitation and real.

The difference between imitation and real

To understand the difference between imitation and real, let us first look at the quality classification of the imitation.

The imitation table is divided into a replica table, a fine imitation watch, and a high imitation watch. Today we will compare the categories in order to illustrate the difference between the imitation and the real table.

Let me talk about the high imitation watch. The high imitation watch is the entry style in the imitation table. Generally, the genuine pearl movement or the Shanghai movement is used. From the outer casing, it is not very different from the original size. The 1.1:1 imitation, the movement ratio The fine imitation is a little worse, the inner shell is slightly worse, but many manufacturers who make fine imitation watches are directly sold to the above-mentioned movements at the price of high imitation watches because of the high cost.

Next, we talked about the fine imitation watch, which is very similar to the high imitation watch, but the fine imitation watch is much better in the material selection. The mirrors are all sapphire, and the internal structure such as the screw interface and the rubber cover of the back cover are all selected. To be better, the pointer no longer uses a very cheap set of two dollars less than the pointer, the movement uses the seagull movement. Compared with the real watch, the difference is still relatively large. If you look at the movement, you can see the difference at a glance. The size of the shell is the same as that of the high imitation table. Generally, it is bigger and thicker than the real one. Waterproof is not as good as genuine. However, the appearance is roughly the same, and there is no problem without tangling the details.

Finally, it is the highest grade in the imitation table, the engraving, which is basically produced by taking the mold one by one, and the requirements on the size are very strict, because the watch is a precision instrument, and the internal structure and machine are required to be strict in size. Core selection must be tailor-made, difficult, high labor costs, and high material costs, which leads to high prices. Compared with genuine products, because it is a one-to-one replica, the size and the original have been, in order to better restore the authentic, in the selection of materials used zirconia high hardness ceramic body buckle, expensive Swiss phosphor, titanium High-tech materials such as carbon fiber. In the movement, because the original movement cannot be obtained, many will add a layer of splint on the outside, which looks exactly the same as the original movement. The difference between this type of table and the real table is mainly the very fine details.