Can Longines watches change the strap?

If you find that the length of the Longines watch strap you bought is not suitable, I believe everyone will want to change a suitable strap. So can Longines watches change the strap? Let me answer this question for everyone.

Longines watch change strap

The Longines watch can be changed with a strap. The following are the specific operations for changing the strap:

First, we need a tool to remove the strap. This kind of thing has two ends, one with a concave shape for unloading the ear and the other with a pointed tip for unblocking the strap hole.

If there is no tool, in fact, the flat-nose screwdriver and the toothpick can also replace popular science. The stick-shaped thing on the surface is called the raw ear, which is the axis above the belt. There are springs at both ends for us to fit in, then remove the old strap. Use a concave end of the tool to catch the small protrusion at one end of the ear, then press down to compress the spring, so that the ear becomes shorter, we can remove it, and then we can install a new strap.

How to clean the Longines leather strap?

(1) Toothbrush soapy water scrubbing method. When the watch is worn for a long time to produce odor, cleaning and keeping it dry is the best way to maintain it. Remove the strap, use a soft toothbrush and a little soapy water to quickly brush the gap between the straps, then clean with a damp cloth and dry with a dry cloth.

(2) Medicinal alcohol scrubbing method. Scrubbing the leather table with 99% medicinal alcohol with special effects such as disinfection, moisture proof, and mildew resistance. Spray it on the leather strap of the watch, and then rub it with beeswax. After three times, it will permanently erase the odor and will not cause any damage to the leather.

(3) Toilet water scrubbing method. The toilet water gives the impression that it is particularly cool, but the toilet water contains a lot of alcohol and is applied to the leather strap of the watch to effectively remove the odor. In addition, you can also apply some leather oil protection strap on the surface of the leather strap to make the maintenance work more perfect.

Replica-Watches will teach you how to choose a fine imitation watch suitable for your size.

I think everyone has encountered this situation: I saw a fine imitation watch, I like it very much, and I tried to buy it. I found that the effect is not good. In fact, a large part of the reason is a matching value between the dial and the wrist.

Step 1: Measuring the wrist size

The wrist should be measured with a soft ruler (not too tight to avoid deformation of the ruler) next to the position behind the wrist.

If you don’t have a tape measure, you can use a soft rope or a piece of soft paper to wrap around the wrist. Remember, you must wear the wrist of the watch. Each person’s left and right wrists are generally different in thickness (reason… it’s hard to say)

Step 2: Formula conversion to determine the size of the wrist suitable for the wrist

– Convert the unit of measure measured in step 1 to millimeters. For example 16 cm to 160 mm.

– Remove this number with the watch diameter number you want to buy. For example, if you want to buy a 38mm diameter dress watch with a wrist circumference of 160mm, the result will be 160:38 = 4.2. This number is called the case index.

– Based on this result, it can be judged whether the size of the watch is suitable for the wrist. The most suitable case index range is from 4 to 5; if it is less than 4, the watch is too big. If it is greater than 5, the watch is too small. For example, the wrist size is 160mm. Then a watch with a size of 32 mm to 40 mm is suitable for wearing.

Precautions:

– If it’s a slender but wide wrist. The case index should be chosen to be slightly less than 4.

– Sport watches and dive watches can choose a case index of less than 4 without any problems.

– If it is a small wrist, you should not choose a watch that is too thick.

– If the lugs are too long, you should not choose a watch that is too large.

– The square case always looks bigger than the round case, so the case index of the square table should be slightly larger.

– An oval and rectangular watch that measures the wrist horizontally.